The Cisco C9300L-48P-4X-E is an enterprise-class 48-port PoE+ Gigabit Ethernet switch designed to support modern campus networks, high-density wireless deployments, IP surveillance systems, and smart building infrastructure. As organizations increasingly connect wireless access points, IP cameras, VoIP phones, and IoT devices, network administrators need reliable access-layer switching with sufficient power capacity and high-speed uplink connectivity. This Cisco Catalyst 9300L model combines 48 Gigabit Ethernet PoE+ ports with four fixed 10G SFP+ uplinks, providing flexible connectivity between network endpoints and aggregation switches. Powered by Cisco IOS XE and equipped with StackWise-320 technology, it supports centralized network management and scalable switching architectures. Its listed switching capacity of 176 Gbps and forwarding rate of 130.95 Mpps make it suitable for demanding enterprise access environments. With a default PoE budget of 505W and a configurable higher power capacity, the C9300L-48P-4X-E provides an effective solution for businesses upgrading their network infrastructure while maintaining room for future expansion.
The Cisco C9300L-48P-4X-E belongs to the Cisco Catalyst 9300L Series of enterprise access switches. It is designed to provide high-density Ethernet connectivity, Power over Ethernet Plus (PoE+), and high-speed fiber uplinks in a single rack-mountable switching platform. Unlike conventional data-only switches, this model can transmit both Ethernet data and electrical power through compatible copper network cables, reducing the need for separate power adapters for connected devices.
The switch provides 48 RJ45 interfaces supporting 10/100/1000 Mbps Ethernet connectivity. Each PoE+ enabled port supports IEEE 802.3at technology, allowing compatible endpoints to receive power directly through the Ethernet connection. This is particularly useful for enterprise wireless access points, IP telephones, security cameras, and other network-powered equipment.
For upstream connectivity, the C9300L-48P-4X-E integrates four fixed 10 Gigabit SFP+ uplink interfaces. These ports connect the access switch to distribution-layer or core-layer switches using suitable optical transceivers and fiber optic cabling. The product page specifies compatibility with standard 1G SFP modules as well as 10G SFP+ modules, subject to the applicable interface and transceiver compatibility requirements. This dual-rate capability gives network administrators more flexibility when integrating the switch into existing fiber infrastructures.
Another important feature is Cisco StackWise-320 technology. It provides up to 320 Gbps of stacking bandwidth and supports a stack of up to eight compatible switches in the specified stacking configuration. Multiple physical switches can therefore operate as a unified logical switching system, simplifying administration and improving network scalability.
The product page lists a switching capacity of 176 Gbps, a forwarding rate of 130.95 million packets per second (Mpps), a MAC address table capacity of up to 32,000 entries, and a 16 MB packet buffer. It also identifies 8 GB DDR4 DRAM and 16 GB internal flash memory.
The model is supplied with the Network Essentials software license tier, which provides a foundation for enterprise switching, basic routing capabilities, security features, and network automation functions within the supported software feature set. Running Cisco IOS XE, the switch offers a familiar operating environment for organizations already using Cisco enterprise networking products.
As enterprise networks become more complex, traditional access switches may struggle to meet increasing requirements for bandwidth, device density, power delivery, and centralized management. Businesses are connecting more endpoints than ever before, including Wi-Fi access points, IP cameras, VoIP phones, access control terminals, smart sensors, and IoT devices. Each additional endpoint increases the demand for stable network connectivity and sufficient power capacity.
The Cisco C9300L-48P-4X-E addresses several common infrastructure challenges through four major advantages.
One of the most important advantages is its 48-port PoE+ configuration. In traditional network installations, every powered endpoint may require an independent electrical outlet and power adapter. This creates additional installation costs, complicated cable management, and difficulties when deploying devices in ceilings, corridors, outdoor enclosures, or remote office locations.
With IEEE 802.3at PoE+ support, compatible devices can receive power and network connectivity through a single Ethernet cable. The switch provides a default PoE budget of 505W with the specified single 715W AC power supply. According to the product page, the maximum configurable PoE budget can reach 1440W with a dual 1100W AC power supply configuration. Actual available power depends on the installed power supplies, hardware configuration, and system operating conditions.
This makes the switch particularly attractive for organizations deploying multiple wireless access points, IP surveillance cameras, and VoIP devices across large office buildings.
Modern enterprise access networks require more than Gigabit Ethernet connections at the edge. Multiple access switches may aggregate traffic from hundreds of endpoints, including high-definition video streams, wireless clients, cloud applications, and business-critical systems.
Four fixed 10G SFP+ uplinks provide high-speed connections to distribution and core network layers. Compared with relying entirely on 1G uplinks, 10G interfaces offer greater aggregate upstream bandwidth and help reduce potential congestion during peak network usage.
Organizations can deploy appropriate 10GBASE-SR or 10GBASE-LR optical transceivers according to fiber type and transmission distance. Support for compatible 1G SFP modules also offers flexibility for phased network upgrades.
As businesses expand, adding individual switches can increase management complexity. Separate management interfaces and configurations may create additional administrative workloads.
StackWise-320 allows up to eight compatible switches to operate as a unified stack, with up to 320 Gbps of stacking bandwidth. This architecture simplifies switch administration and provides a practical way to expand port density without completely redesigning the access-layer network.
It is particularly useful for campus networks, multi-floor office buildings, and enterprise environments with growing numbers of connected devices. Network architects should still design appropriate redundancy and verify supported stacking hardware and software requirements before deployment.
The C9300L-48P-4X-E offers a combination of Gigabit access ports, 10G fiber uplinks, enterprise switching features, and Cisco IOS XE software. Its listed 176 Gbps switching capacity and 130.95 Mpps forwarding performance provide a strong foundation for business network traffic.
The Network Essentials license tier supports core enterprise networking requirements, while the platform's architecture allows organizations to develop their access-layer infrastructure around a consistent Cisco environment.
For procurement teams, another important consideration is equipment lifecycle management. Replacing an existing switch does not always require rebuilding the entire network. By selecting a switch with suitable port density, uplink capacity, PoE capability, and stacking support, organizations can reduce unnecessary infrastructure changes and prepare for future network expansion.
The Cisco C9300L-48P-4X-E is designed for enterprise access-layer deployment, where numerous end devices need reliable connectivity and centralized network management. Its combination of 48 Gigabit Ethernet PoE+ ports and four 10G SFP+ uplinks allows it to support several practical network scenarios.
In a multi-floor office building, a network administrator may need to connect desktop computers, wireless access points, IP telephones, printers, and conference room equipment.
The 48 copper Gigabit Ethernet ports provide connectivity for these endpoints. Wireless access points and VoIP phones supporting IEEE 802.3at can receive power directly from the switch, reducing the number of electrical outlets required near individual devices.
For upstream connectivity, the four 10G SFP+ interfaces can connect the access switch to a distribution switch or campus core. This creates a hierarchical network architecture in which endpoint traffic is collected at the access layer and forwarded to higher-capacity network equipment.
When deploying multiple switches across different floors, StackWise-320 can help consolidate compatible devices into a manageable switching stack. Network administrators should plan VLAN assignments, uplink aggregation, spanning-tree behavior, and redundant paths according to the overall campus network design.
Large commercial buildings, warehouses, logistics centers, and industrial facilities often require dozens of IP surveillance cameras.
Each camera needs a stable Ethernet connection and, in many cases, PoE power. The C9300L-48P-4X-E allows compatible PoE+ cameras to connect directly to its RJ45 ports without requiring separate local power adapters.
For example, a security deployment may connect cameras distributed across several building zones to multiple access switches. Video traffic can then be transmitted through the 10G SFP+ uplinks toward the aggregation layer and video management servers.
The switch's 16 MB packet buffer and 176 Gbps switching capacity provide useful switching resources for traffic aggregation. However, actual video performance depends on camera bitrate, simultaneous streams, network topology, storage infrastructure, and uplink utilization. Proper bandwidth planning remains essential.
Enterprise wireless networks are evolving rapidly. Modern Wi-Fi 6 and Wi-Fi 6E access points can support higher client density and increased data throughput compared with older wireless generations.
A suitable PoE+ switch can simplify access point installation by supplying both power and Ethernet connectivity through a single cable. The C9300L-48P-4X-E provides 48 PoE+ interfaces, making it suitable for access-layer deployments in offices, educational institutions, hotels, and commercial buildings.
The four 10G SFP+ uplinks can connect the wireless access switch to the distribution layer, helping accommodate aggregated wireless traffic.
When planning such deployments, administrators should calculate the total PoE consumption of all connected access points. They should also consider whether individual devices require standard PoE, PoE+, or a higher power standard. The available 505W default PoE budget should not be confused with unlimited simultaneous full-power delivery across all 48 ports.
For growing enterprises, network expansion often requires additional access ports without increasing management complexity.
The StackWise-320 architecture allows up to eight compatible switches to form a stack. Administrators can manage the resulting logical switching system through a unified configuration approach, subject to supported software and hardware requirements.
A practical deployment may involve several switches serving different departments, such as finance, engineering, customer service, and administration. VLAN segmentation can separate departments and help control broadcast domains and access policies.
The four 10G SFP+ uplinks provide connections to upstream infrastructure. Depending on the network design, administrators can configure appropriate link aggregation, redundant uplinks, and routing or Layer 2 functions supported by the software license and platform.
Before purchasing the C9300L-48P-4X-E, buyers should confirm several technical details:
PoE power requirements: Verify the total power consumption of connected endpoints and select suitable power supply configurations.
Optical transceiver compatibility: Confirm the required wavelength, fiber type, transmission distance, connector type, and Cisco compatibility of each SFP or SFP+ module.
Stacking requirements: Check StackWise cable, stacking configuration, software compatibility, and the maximum supported stack size.
Software licensing: Confirm whether Network Essentials meets the required routing, security, and automation feature requirements.
Power redundancy: Evaluate whether dual power supplies are necessary for the required availability and PoE capacity.
For international procurement, buyers should also confirm the exact hardware part number, product condition, power supply configuration, warranty terms, and shipping arrangements before placing an order.
The Cisco C9300L-48P-4X-E is an enterprise access-layer switch used in corporate offices, campus networks, IP surveillance systems, and wireless deployments. It provides 48 Gigabit PoE+ ports and four 10G SFP+ uplinks for connecting powered endpoints and upstream network equipment.
This switch has 48 Gigabit Ethernet RJ45 ports supporting 10/100/1000 Mbps connectivity and PoE+. It also includes four fixed 10 Gigabit SFP+ uplink ports for fiber connections to aggregation or core switches.
The listed default PoE budget is 505W with a single specified 715W AC power supply. The product page lists a configurable maximum of 1440W with dual 1100W AC power supplies. Buyers should verify the exact supported power configuration before ordering.
Yes. The product page specifies that its four 10G SFP+ uplink interfaces support compatible 1G SFP modules as well as 10G SFP+ modules. The exact transceiver model, fiber type, and software compatibility should be checked before installation.
The primary difference is PoE capability. The 48P model supports PoE+ power delivery across its 48 copper ports, while the 48T model is intended for data-only connectivity. Choose the 48P version when connected devices require Ethernet-based power.
According to the product listing, the C9300L-48P-4X-E is supplied in new condition with a one-year warranty and a stated lead time of 1–3 days. LonRise also lists hardware testing, optical compatibility checks, technical assistance, and international shipping services.
The Cisco C9300L-48P-4X-E combines 48 Gigabit PoE+ access ports, four 10G SFP+ uplinks, and StackWise-320 technology to address the connectivity, power delivery, and scalability requirements of modern enterprise networks. It is a practical option for businesses upgrading campus infrastructure, wireless access networks, and IP surveillance systems.
コンタクトパーソン: Mrs. Laura
電話番号: +86 15921748445
ファックス: 86-21-37890191